Northern Lights M773L — Stopping

Operation · engine

For the Northern Lights M773L, from the Northern Lights operator's manual.

Applies to: Northern Lights M773L

Procedure

1. Remove electrical load from the generator set.
2. Run the engine for a 3 to 5 minute cool down period.
3. Move the Engine Control switch to the STOP position momentarily.
4. Close the sea-cock, fuel valve, and battery switch.

Full service-parts list: Northern Lights M773L →

Source: Northern Lights operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Northern Lights repair guides →