Northern Lights M753 / M753W2 — Fuel Filters

Maintenance

For the Northern Lights M753 / M753W2, from the Northern Lights operator's manual.

Applies to: Northern Lights M753, Northern Lights M753W2

Before you start

  • Do not overtighten.

Parts for this job

Part numbers from the service-parts lists for Northern Lights M753, Northern Lights M753W2. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Primary fuel filter should be installed; Racor fuel filter-water separator recommended.
  2. Check primary fuel filter daily; empty collection bowl as necessary.
  3. Change primary filter element every 500 hours or as necessary; if bowl fills with water, change primary and secondary elements immediately.
  4. Change secondary fuel filter every 500 hours or as necessary.
  5. Remove spin-on filter counterclockwise with filter wrench; fill new cartridge with fuel; oil gasket surface.
  6. Screw on until gasket contacts sealing surface, then tighten two-thirds turn by hand; do not overtighten.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Specs & values

Full service-parts list: Northern Lights M753 →, Northern Lights M753W2 →

Source: Northern Lights operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Northern Lights repair guides →