Northern Lights M175C2 — Shutdown
Operation · Engine/genset
For the Northern Lights M175C2, from the Northern Lights operator's manual.
Applies to: Northern Lights M175C2
Before you start
- Do not turn battery switch OFF while engine is running.
Procedure
- Unload generator and run three to five minutes for cool down.
- Turn Engine Control Switch to OFF.
- Close seacock and fuel valves for extended shutdown.
- Place battery switch OFF only after engine stops.
Full service-parts list: Northern Lights M175C2 →
Source: Northern Lights operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.