Northern Lights M175C2 — Raw Water Pump Impeller Replacement
Maintenance
For the Northern Lights M175C2, from the Northern Lights operator's manual.
Applies to: Northern Lights M175C2
Before you start
- Keep extra impeller and cover gasket on board.
Procedure
- Remove pump end cover.
- Remove impeller with water pump pliers; remove all broken pieces.
- Clean inside of housing.
- Press in new impeller and place sealing washer.
- Replace cover using new gasket.
Tools required
- water pump pliers Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Full service-parts list: Northern Lights M175C2 →
Source: Northern Lights operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.