Northern Lights M175C2 — Before Starting
Operation · Engine/genset
For the Northern Lights M175C2, from the Northern Lights operator's manual.
Applies to: Northern Lights M175C2
Before you start
- Use protective clothing and open filler cap carefully when engine is warm.
Procedure
- Check expansion tank water level about 1 3/4 in. below filler cap when cold.
- Open turbocharger venting cock when filling coolant.
- Check crankcase oil level between waffled area and oo mark.
- Check fuel tank level and open fuel valves.
- Close seacock, clean strainer, and reopen seacock.
- Place battery switch in ON position.
Full service-parts list: Northern Lights M175C2 →
Source: Northern Lights operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.