Northern Lights M175C2 — Air Cleaner Service
Maintenance
For the Northern Lights M175C2, from the Northern Lights operator's manual.
Applies to: Northern Lights M175C2
Before you start
- Do not run engine with air cleaner removed.
Parts for this job
Part numbers from the service-parts list for Northern Lights M175C2. Verify against your serial number before ordering; some links are affiliate links.
Procedure
- Inspect air cleaner valve daily.
- Replace filter when restriction indicator shows 625 mm (25 in.) H2O.
- Loosen hose clamp and attaching strip.
- Ensure rubber tube is good and new filter clean and properly installed.
- Start engine and check for leaks.
Specs & values
- Restriction indicator 625 mm (25 in.) H2O
Full service-parts list: Northern Lights M175C2 →
Source: Northern Lights operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.