Northern Lights M150A13 / M80A13 — Changing Engine Oil and Replacing Oil Filter

Maintenance · Engine lubrication

For the Northern Lights M150A13 / M80A13, from the Northern Lights owner's manual.

Applies to: Northern Lights M150A13

Procedure

1. Run engine about 5 minutes to warm oil; shut off.
2. Remove oil pan drain plug and drain crankcase.
3. Remove oil filter element.
4. Wipe sealing surfaces and install new element and seals.
5. Install drain plug with correct torque.
6. Fill crankcase with correct engine oil.
7. Crank engine 30 seconds without starting.
8. Start, check leaks, stop and check level after 10 minutes.

Full service-parts list: Northern Lights M150A13 →

Source: Northern Lights owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Northern Lights repair guides →