Northern Lights M1064H / M1066H — Booster Batteries
Operation
For the Northern Lights M1064H / M1066H, from the Northern Lights operator's manual.
Applies to: Northern Lights M1064H, Northern Lights M1066H, John Deere Powertech Tier II 4045 engine, John Deere Powertech Tier II 6068 engine
Before you start
- Battery gas can explode; keep flames and sparks away from batteries.
Procedure
- Check battery electrolyte level; add distilled water.
- Booster and main batteries must have same voltage rating.
- Connect positive terminal of booster battery to positive terminal of main battery.
- Connect negative terminal of booster battery to ground on engine block.
- Remove booster battery after starting engine.
- For sealed batteries, see manufacturer charging and booster instructions.
Full service-parts list: Northern Lights M1064H →, Northern Lights M1066H →
Source: Northern Lights operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.