Northern Lights L6125 — Shutdown
Operation · Engine
For the Northern Lights L6125, from the Northern Lights operator's manual.
Applies to: Northern Lights L6125, Northern Lights L6125H engine
Before you start
- Do not turn battery switch to OFF while engine is running.
Procedure
- Run engine three to five minutes in neutral at 1000 RPM for cool down.
- Return engine to low idle.
- Turn key switch counterclockwise as far as possible to stop engine.
- Close seacock and fuel valves.
- Put battery switch in OFF position.
Specs & values
- Cool-down 3 to 5 minutes at 1000 RPM in neutral
Full service-parts list: Northern Lights L6125 →
Source: Northern Lights operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.