Northern Lights L6125 — Changing Oil Filter

Maintenance · Lube oil filter

For the Northern Lights L6125, from the Northern Lights operator's manual.

Applies to: Northern Lights L6125, Northern Lights L6125H engine

Procedure

1. Use a filter wrench to remove old filter; dispose of filter in approved manner.
2. Make sure old filter gasket is removed and discarded.
3. Lubricate rubber gasket on new filter.
4. Screw filter onto nipple until gasket meets sealing surface.
5. Using hands only, tighten filter one-half turn farther.
6. Fill engine with recommended oil.
7. Start engine and check for leakage; stop engine and check oil level.

Full service-parts list: Northern Lights L6125 →

Source: Northern Lights operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Northern Lights repair guides →