Northern Lights L1276 / L1276A2 — Starting
Operation · Engine
For the Northern Lights L1276 / L1276A2, from the Northern Lights operator's manual.
Applies to: Northern Lights L1276A2
Before you start
- Never race a cold engine.
Procedure
- Put gear control in neutral.
- Move throttle control to idle.
- Turn key to first position; check voltmeter not below 12 volts (24 volts for 24-volt systems).
- Turn key to starting position; release when engine starts.
- Move throttle to approximately 1000 RPM.
- Do not crank starter more than 15 seconds consecutively.
- Warm up at 1000 RPM for 3 to 5 minutes.
Specs & values
- Starter cranking limit: 15 seconds
- Warm-up: 1000 RPM for 3 to 5 minutes
Full service-parts list: Northern Lights L1276A2 →
Source: Northern Lights operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.