Northern Lights L1276 / L1276A2 — Shutdown
Operation · Engine
For the Northern Lights L1276 / L1276A2, from the Northern Lights operator's manual.
Applies to: Northern Lights L1276A2
Before you start
- Do not turn battery switch to OFF while engine is running.
Procedure
- Run engine three to five minutes in neutral at 1000 RPM.
- Return engine to low idle.
- Turn key switch counterclockwise as far as possible to stop engine.
- Close sea cock and fuel valves.
- Put battery switch in OFF position after engine stops.
Full service-parts list: Northern Lights L1276A2 →
Source: Northern Lights operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.