Northern Lights L1276 / L1276A2 — Raw Water Pump Impeller Replacement

Maintenance

For the Northern Lights L1276 / L1276A2, from the Northern Lights operator's manual.

Applies to: Northern Lights L1276A2

Procedure

1. Remove pump end cover.
2. Remove impeller with water pump pliers; remove all pieces of failed impeller.
3. Clean inside of housing.
4. Press in new impeller; place sealing washer in outer end of impeller center.
5. Replace cover using new gasket.
6. Keep extra impeller and cover gasket on board.

Full service-parts list: Northern Lights L1276A2 →

Source: Northern Lights operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Northern Lights repair guides →