Northern Lights L1276 / L1276A2 — Changing Oil Filter

Maintenance

For the Northern Lights L1276 / L1276A2, from the Northern Lights operator's manual.

Applies to: Northern Lights L1276A2

Procedure

1. Use a filter wrench to remove old filter.
2. Remove and discard old gasket.
3. Lubricate rubber gasket on new filter and screw on until gasket meets sealing surface.
4. Using hands only, tighten filter one-half turn farther.
5. Fill engine with recommended oil.
6. Start engine, check for leakage; stop and check oil level.

Full service-parts list: Northern Lights L1276A2 →

Source: Northern Lights operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Northern Lights repair guides →