Home›Repair guides›Northern Lights›Change Engine Oil

Northern Lights — Change Engine Oil

Maintenance · crankcase

From a Northern Lights owner's manual covering: L439, L668, M40C, M439, M445, M65C, M668, M99C. Check it applies to your exact model before use.

Applies to: Northern Lights M668

Before you start

  • Never put additives or flushing oil in crankcase.

Procedure

  1. Change engine oil after first 50 hours, first 100 hours, then every 200 hours.
  2. Propulsion with drain pump: remove dipstick, unscrew dipstick tube, insert hand pump, drain by pumping.
  3. Generator sets: remove plug from base frame outlet, screw in drain hose, open oil pan valve.
  4. Drain oil into suitable container, close valve, remove hose and replace plug.
  5. Refill engine with recommended oil.
  6. Change oil at any seasonal change in temperature.

Tools required

  • Hand drain pump (optional) Amazon
  • Owner-supplied drain hose Amazon

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Specs & values

  • L438D 9 qt (8.5 liters)
  • L439T 14 qt (13.2 liters)
  • 445 Series 14 qt (13.2 liters)
  • 668 Series 18 qt (17 liters)

Full service-parts list: Northern Lights M668 →

Source: Northern Lights owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Northern Lights repair guides →