Northern Lights 984K / M984 — Stopping the engine

Operation · Series 4 control panel

For the Northern Lights 984K / M984, from the Northern Lights operator's manual.

Applies to: Northern Lights M984, Northern Lights 984K engine

Procedure

1. Remove electrical load from the generator set.
2. Run the engine for a three to five minute cool-down period.
3. Move the Engine Control switch to the STOP position until the engine stops completely.
4. Shut off seacock, fuel valve, and battery switch.

Full service-parts list: Northern Lights M984 →

Source: Northern Lights operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Northern Lights repair guides →