Navistar MAXXFORCE 7.2 — Oil Draining Procedure

For the Navistar MAXXFORCE 7.2.

Browse Navistar generators & specs →

Procedure

1. Place an oil drain pan beneath the oil drain plug to collect the oil.
2. Remove oil pan drain plug (R 1/2") and washer. Drain engine oil and dispose of used engine oil according to applicable laws.
3. Discard washer, inspect drain plug and replace if necessary. Place a new washer onto drain plug and install to oil pan. Apply the torque of 55 to 75 N.m.

Source: manual:JCB-Engines-Navistar-Mahindra-Acteon-Workshop-Manual-1.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.