Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Generator Shutdown Procedure

MultiQuip DCA-220SSVU — Generator Shutdown Procedure

For the MultiQuip DCA-220SSVU.

Browse MultiQuip generators & specs →

Before you start

  • NEVER stop the engine suddenly except in an emergency

Procedure

  1. In the event of an emergency, switch the MAIN, GFCI and LOAD circuit breakers to OFF position
  2. Place the MPEC Control Switch to the OFF/RESET position
  3. Let the engine cool by running it at low speed for 3-5 minutes with no load applied
  4. Place the MPEC Control Switch to the OFF/RESET position

Specs & torque values

  • Cool-down time: 3-5 minutes at low speed

Source: manual:DCA220SSVU-rev-1-manual.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.