MTU — Fuel filter replacement
Maintenance · Fuel system
From a MTU operator's manual covering: 12V 2000 G22, 12V 2000 G42, 12V 2000 G62, 12V 2000 G82, 16V 2000 G22, 16V 2000 G42, 16V 2000 G62, 16V 2000 G82, 18V 2000 G62, 18V 2000 G82. Check it applies to your exact model before use.
Browse MTU generators & specs →
Before you start
- Fuels are combustible – avoid open flames, electric sparks and smoking
Procedure
- Disable engine start.
- Unscrew filter with oil filter wrench and dispose of correctly.
- Clean sealing surface at connector.
- Moisten new filter sealing ring with fuel, install and tighten by hand.
- Replace second filter in same way.
- Vent fuel filter.
- Release engine start.
Tools required
- Oil filter wrench F3 0379 104 Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Three-way cock position A = operating position (both filters cut in)
Source: MTU operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.