MTU — Crankcase ventilation filter replacement
Maintenance · Crankcase breather
From a MTU operator's manual covering: 12V 2000 G22, 12V 2000 G42, 12V 2000 G62, 12V 2000 G82, 16V 2000 G22, 16V 2000 G42, 16V 2000 G62, 16V 2000 G82, 18V 2000 G62, 18V 2000 G82. Check it applies to your exact model before use.
Browse MTU generators & specs →
Procedure
- Remove cover and O-ring.
- Remove filter from housing.
- Coat new O-ring with petroleum jelly and fit in housing groove.
- Insert new filter correctly positioned and install cover with O-ring.
- Tighten cover screws to 6 Nm + 2 Nm.
Specs & values
- Cover screws 6 Nm + 2 Nm
- Lubricant: engine oil
Source: MTU operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.