MQ Power — Throttle Cable Installation (Honda and Robin)
Installation
From a MQ Power owner's manual covering: B-43-H8, B-44-BS8, B-44-H8, B-44-R7. Check it applies to your exact model before use.
Browse MQ Power generators & specs →
Procedure
- Set throttle to idle position by rotating grip toward the operator.
- Feed throttle cable through cable housing; keep throttle indicator on 1 inch.
- Connect throttle cable to the engine (Honda or Robin).
- Ensure no more than 1/4 in (6.4 mm) housing protrudes past engine housing clamp.
- Tighten cable clamp screw and swivel stop screw.
- Adjust cable tension by rotating the barrel adjuster.
Specs & values
- No more than 1/4 in (6.4 mm) cable housing protrusion past housing clamp
Source: MQ Power owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.