MQ Power — Spark Plug Service
Maintenance
From a MQ Power owner's manual — check it applies to your exact model before use.
Browse MQ Power generators & specs →
Before you start
- ALWAYS stop the engine when assembling, lubricating, or adjusting any part of the vibrator. Disconnect the spark plug wire and secure it away from the spark plug.
Procedure
- Remove and clean the spark plug.
- Adjust the spark plug gap to 0.024–0.028 inch (0.6–0.7 mm).
- This unit has electronic ignition, which requires no further adjustments.
Specs & values
- Spark plug gap 0.024–0.028 in. (0.6–0.7 mm)
Source: MQ Power owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.