MQ Power — Pitch Cable Installation
Installation · Blade pitch cable
From a MQ Power owner's manual covering: B-43-H8, B-44-BS8, B-44-H8, B-44-R7. Check it applies to your exact model before use.
Browse MQ Power generators & specs →
Procedure
- Expose the pitch cable to maximum by setting handle pitch to the no pitch position.
- Lock the spring in the compressed position by releasing the blade pitch adjustment trigger.
- Remove one brass set nut from the blade pitch cable end.
- Thread the second brass set nut toward the cable as far as possible.
- Insert the cable end through the yoke eyelet.
- Tighten the first brass set nut by hand to remove all cable slack.
- Tighten the second brass set nut against the yoke boss with a wrench.
- Finish tightening the first brass set nut against the yoke boss.
Tools required
- Wrench Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: MQ Power owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.