MQ Power — Normal Shutdown

Operation · Engine / controls

From a MQ Power owner's manual — check it applies to your exact model before use.

Browse MQ Power generators & specs →

Procedure

1. Remove the flexible shaft and vibrator head from the concrete mix.
2. Place the throttle lever in the UP (TURTLE) position and run the engine for three minutes at idle speed.
3. Place the ON/OFF switch located on the left strap to the OFF position.
4. Move the fuel valve lever to the OFF position.
5. Place the engine ON/OFF switch in the OFF position.

Source: MQ Power owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More MQ Power repair guides →