MQ Power — Initial Start-Up (Honda Engine)
Operation
From a MQ Power owner's manual covering: B-43-H8, B-44-BS8, B-44-H8, B-44-R7. Check it applies to your exact model before use.
Browse MQ Power generators & specs →
Before you start
- Never disable or disconnect the centrifugal kill switch.
Procedure
- Place the engine fuel valve lever to the ON position.
- Rotate the throttle to the idle position.
- Place the centrifugal kill switch in the ON position.
- Place the choke lever in the OPEN position.
- Grasp the starter grip and pull briskly and smoothly.
- Once started, slowly return the choke lever to the CLOSED position.
- Run the engine several minutes; check for fuel leaks and unusual noises.
- Rotate the throttle toward the RUN position to begin troweling.
Source: MQ Power owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.