Home›Repair guides›MQ Power›Replacing Oil Filter

MQ Power CS-6369 / DCA180SSI — Replacing Oil Filter

Maintenance

For the MQ Power CS-6369 / DCA180SSI, from the MQ Power operator's manual.

Applies to: MQ Power DCA180SSI, Isuzu 6HK1X engine

Parts for this job

Part numbers from the service-parts lists for MQ Power DCA180SSI, Isuzu 6HK1X engine. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Remove the old oil filter.
  2. Apply a film of oil to the gasket on the new oil filter.
  3. Install the new oil filter.
  4. Run the engine for a while and check for leaks before adding more oil.
  5. Clean excessive oil from engine.

Full service-parts list: MQ Power DCA180SSI →, Isuzu 6HK1X engine →

Source: MQ Power operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More MQ Power repair guides →