Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›N° m {1.5 to 2 kgf m} [10.8 to 14.5 Ibf-ft]).

Mitsubushi — N° m {1.5 to 2 kgf m} [10.8 to 14.5 Ibf-ft]).

A Mitsubushi service procedure — check it applies to your exact model before use.

Browse Mitsubushi generators & specs →

Procedure

  1. 5. With the rocker cover removed, operate the
  2. engine at 600 rpm and check for any fuel
  3. leakage from each joint. Install the rocker
  4. cover after confirming no fuel leakage.
  5. 3. Install the nozzle gland and tighten the nut by § G i

Source: manual:Mitsubishi S12A2 Manual.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.