Mitsubishi — Water Separator Element - Replace
Maintenance · Fuel system water separator
From a Mitsubishi operator's manual — check it applies to your exact model before use.
Browse Mitsubishi generators & specs →
Before you start
- Open the inlet valve slowly to prevent overflowing fuel
Procedure
- Close the inlet cock and outlet cock.
- Turn the T-handle and remove the water separator cover.
- Open the drain cock and drain fuel in the water separator.
- Close all drain cocks after draining.
- Replace the element with a new one.
- Fill the water separator with fuel.
- Attach the water separator cover and tighten the T-handle.
- Open the inlet cock and outlet cock, then bleed air from the fuel system.
Source: Mitsubishi operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.