Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Magnetic Switch Testing

Mitsubishi SL-Series — Magnetic Switch Testing

For the Mitsubishi SL-Series.

Browse Mitsubishi generators & specs →

Procedure

  1. Disconnect the connector from the M terminal of the magnetic switch
  2. Connect the magnetic switch to a 12 volt battery with a switch as shown in the illustration to test the pull-in coil
  3. Close the switch to see if the pinion shifts
  4. If the piston fails to shift, the magnetic switch is faulty

Tools required

  • 12 volt battery
  • Switch

Source: manual:Mitsubishi SL series ServiceManual.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.