Mitsubishi S6R S6R2 / S6R- S6R2 — Clean air cleaner element
Maintenance · Air inlet system
For the Mitsubishi S6R S6R2 / S6R- S6R2, from the Mitsubishi operator's manual.
Applies to: Mitsubishi S6R engine, Mitsubishi PS6 engine
Before you start
- Never service the air cleaner when the engine is running
- Do not clean the element by bumping or tapping
- Wear protective face shield, clothing and shoes
Procedure
- Direct pressure air inside the element along the length of pleats.
- Insert a light inside the clean, dry element and inspect.
- Discard the element if rips or tears are found.
- If the indicator still shows RED shortly after installation, change the element.
Tools required
- Pressure air Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Maximum air pressure 0.69 MPa (7 kgf/cm2) [100 psi]
Source: Mitsubishi operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.