Mitsubishi S6R S6R2 / S6R- S6R2 — Change hydraulic governor oil filter
Maintenance · Lubrication system - hydraulic governor
For the Mitsubishi S6R S6R2 / S6R- S6R2, from the Mitsubishi operator's manual.
Applies to: Mitsubishi S6R engine, Mitsubishi PS6 engine
Procedure
- Place a container under the governor oil filter.
- Loosen the air vent plug and remove the case from the bracket; remove the used element.
- Remove the oil pipe from the center bolt and remove the center bolt.
- Put a new element in the case and install the case to the bracket; tighten the center bolt.
- Install the oil pipe to the center bolt and install the drain plug.
- Remove the air vent plug and fill up the filter with engine oil; install the air vent plug.
Source: Mitsubishi operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.