Mitsubishi S6R S6R2 / S6R- S6R2 — Adjust the alternator drive belt
Adjustments · Electrical system - V-belts
For the Mitsubishi S6R S6R2 / S6R- S6R2, from the Mitsubishi operator's manual.
Applies to: Mitsubishi S6R engine, Mitsubishi PS6 engine
Before you start
- Change the belts if cracked, frayed or cut
- Never adjust the V-belts while the engine is running
Procedure
- Remove the belt cover of the alternator.
- Loosen the alternator mounting bolts.
- Turn the adjusting rod to move the alternator to obtain the required belt deflection.
- Tighten the alternator mounting bolts.
Specs & values
- Deflection approximately 10 to 15 mm under 98 to 147 N force
Source: Mitsubishi operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.