Mitsubishi — Replacement of 4WD Front Axle Oil (Differential Case and Kingpin Gear Case)
Maintenance
From a Mitsubishi owner's manual — check it applies to your exact model before use.
Browse Mitsubishi generators & specs →
Procedure
- Remove drain plugs at the bottom of the left and right kingpin gear cases and the differential gear case.
- Drain oil completely, then tighten the plugs securely.
- Fill through the lubrication ports on the right and left side of the front axle up to half the specified level.
- Remove the kingpin gear case oil level plug after enough time.
- Check the oil level as specified and tighten the plug securely.
Specs & values
- 4WD front axle (with diff. case) 2.5 l (5.5 pint)
Source: Mitsubishi owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.