Mitsubishi — Operating the Engine for Maintenance during Storage

Maintenance · General

From a Mitsubishi owner's manual — check it applies to your exact model before use.

Browse Mitsubishi generators & specs →

Procedure

1. While pulling manual stop lever, crank engine approx 10 seconds using starter
2. Stop for approx 1 minute, repeat 2-3 times
3. Start up engine, make sure oil pressure rises
4. Operate engine about 5-10 minutes under no load

Source: Mitsubishi owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Mitsubishi repair guides →