Mitsubishi — Lifting the engine
Installation
From a Mitsubishi owner's manual — check it applies to your exact model before use.
Browse Mitsubishi generators & specs →
Before you start
- Excessive load on hangers can damage them and cause a serious accident.
Procedure
- Use wire ropes, shackles and slings capable of supporting the weight of the engine.
- Attach slings to the hangers provided on the engine.
- Attach wire ropes to the hanger after removing the pipe cover and insulator near the hanger.
- Keep the engine balanced during lifting by considering its center of gravity.
- Keep the angle formed by slings attached to hangers within 60 degrees.
- Use a cloth or other soft padding to prevent wire ropes from contacting the engine.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Angle formed by slings within 60 degrees
Source: Mitsubishi owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.