Mitsubishi — Inspection of fuel control linkage ball joints
Maintenance · Fuel System
From a Mitsubishi owner's manual — check it applies to your exact model before use.
Browse Mitsubishi generators & specs →
Before you start
- If the seal on the ball joint is broken, the warranty may be invalidated.
Procedure
- Check ball joints in fuel control linkage for looseness.
- If amount of looseness is more than 0.1 mm, replace the ball joints.
- If ball joint attached with a seal is loose, consult a Mitsubishi dealer.
- If ball joints are integrated in control linkage, replace control linkage when ball joints are loose.
- When installing ball joints, tighten the nuts firmly.
Specs & values
- looseness limit 0.1 mm [0.004 in.]
Source: Mitsubishi owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.