Home›Repair guides›Mitsubishi›Inspecting turbocharger

Mitsubishi — Inspecting turbocharger

Testing & diagnosis

From a Mitsubishi owner's manual — check it applies to your exact model before use.

Browse Mitsubishi generators & specs →

Before you start

  • Check the turbocharger when the engine is cold.
  • If the color of the exhaust gas is abnormal, also inspect the turbocharger.

Procedure

  1. Check the turbocharger when the engine is cold.
  2. Make sure the compressor wheel is not rotating.
  3. Disconnect the pipe from the air inlet side.
  4. Hold the compressor wheel nut by hand and turn the wheel.
  5. Check for looseness or abnormal noise; replace the bearings if found.

Source: Mitsubishi owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Mitsubishi repair guides →