Mitsubishi — Inspecting the V-belt
Maintenance
From a Mitsubishi owner's manual — check it applies to your exact model before use.
Browse Mitsubishi generators & specs →
Before you start
- Keep oil and grease away from the belt.
Procedure
- Inspect external appearance of V-belt; replace if damage or surface separation found.
- Apply force approx. 98 to 147 N [10 to 15 kgf] to center of V-belt; deflection of 10 to 15 mm is appropriate.
- To adjust belt tension, turn the adjusting rod.
Specs & values
- deflection 10 to 15 mm at approx. 98 to 147 N
Source: Mitsubishi owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.