Mitsubishi — Inspecting battery electrolyte level
Maintenance
From a Mitsubishi owner's manual — check it applies to your exact model before use.
Browse Mitsubishi generators & specs →
Before you start
- If battery electrolyte is spilled on your skin, flush immediately with plenty of water. If it enters the eyes, flush and seek medical attention.
Procedure
- Check that the fluid surface level is between the LOWER LEVEL and UPPER LEVEL lines.
- For the battery without level lines, the correct fluid surface level is about 10 to 15 mm above the top of the plates.
- If the fluid level is low, remove the caps and add distilled water to the proper level.
Specs & values
- Fluid surface level: about 10 to 15 mm [0.394 to 0.591 in.] above the top of the plates
Source: Mitsubishi owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.