Mitsubishi — Inside of Fuel Filters (Wire-element Type) - Clean
Maintenance
From a Mitsubishi operator's manual — check it applies to your exact model before use.
Browse Mitsubishi generators & specs →
Procedure
- Close the fuel feed valve to cut off fuel supply.
- Prepare a drip pan under the fuel filters.
- Drain fuel by removing the drain plug and sealing washer.
- Remove the filter case by loosening the mounting bolt at the top of the filter.
- Remove dust and particles from the element with a soft brush and diesel fuel.
- Clean the inside of the case.
- Reinstall the drain plug, sealing washer and filter case.
- Bleed air from the fuel filter.
Tools required
- Soft brush Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Mitsubishi operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.