Mitsubishi — Hydraulic Control Adjustment

Adjustments · hydraulic control lever

From a Mitsubishi owner's manual — check it applies to your exact model before use.

Browse Mitsubishi generators & specs →

Procedure

1. Disconnect the lift rod from the lift arm.
2. Set the lift arm to UP position with the control lever.
3. Check and adjust the free play (A) to about 5~15 mm (3/16~5/8 in).
4. If play is too small, shift the adjust nut toward the control lever (tightening direction).
5. If play is too large, shift the adjust nut toward the rod end (loosening direction).

Source: Mitsubishi owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Mitsubishi repair guides →