Mitsubishi — Gauze Filter - Clean
Maintenance · Fuel feed pump inlet
From a Mitsubishi operator's manual — check it applies to your exact model before use.
Browse Mitsubishi generators & specs →
Procedure
- Remove the eye bolt at the inlet port of the fuel feed pump.
- Remove the gauze filter fitted inside the eye bolt using a screw driver.
- Soak the gauze filter in fuel and clean it with a brush.
- Reinstall the gauze filter into the eye bolt.
- Install the eye bolt to the fuel feed pump.
- Bleed the air from the fuel filter.
Tools required
- Screw driver Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Mitsubishi operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.