Mitsubishi — Fuel Filter Element Replacement
Maintenance
From a Mitsubishi owner's manual — check it applies to your exact model before use.
Browse Mitsubishi generators & specs →
Procedure
- Close the filter body cock.
- Loosen the ring nut and remove the cup.
- Remove the element; clean or replace it if necessary.
- Install cleaned or new element to the filter body.
- Install cleaned cup to body taking care of the O-ring and tighten.
- Loosen air vent screw, open cock, fill cup with fuel, confirm no air left, tighten vent screw.
- Check for fuel leakage.
Source: Mitsubishi owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.