Mitsubishi — Engine Oil Filter Replacement
Maintenance
From a Mitsubishi owner's manual — check it applies to your exact model before use.
Browse Mitsubishi generators & specs →
Procedure
- Remove the cartridge type oil filter with the special tool.
- Lightly apply engine oil or grease to the seal surface of the new filter.
- Screw in the filter until the rubber seal contacts the case surface.
- Screw in a further 2/3 turn by hand.
- Start the engine and inspect the seal surface for leaks.
Tools required
- Special tool for oil filter Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Mitsubishi owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.