Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›>>A<< VALVE STEM SEAL INSTALLATION

Mitsubishi — >>A<< VALVE STEM SEAL INSTALLATION

A Mitsubishi service procedure — check it applies to your exact model before use.

Browse Mitsubishi generators & specs →

Before you start

  • NOTE: The special tool must be used to install the

Procedure

  1. 1. Install the valve spring seat.
  2. 2. Using special tool Valve stem seal installer
  3. (800412), install a new valve stem seal.
  4. NOTE: The special tool must be used to install the
  5. valve stem seal. Improper installation could result
  6. in oil leaking past the valve guide.

Tools required

  • 2. Using special tool Valve stem seal installer
  • NOTE: The special tool must be used to install the

Source: manual:Mitsubishi-2.0L-2.4L-Service-Manual-106992-Revision-D.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.