Mitsubishi — >>C<< THERMOSTAT INSTALLATION

A Mitsubishi service procedure — check it applies to your exact model before use.

Browse Mitsubishi generators & specs →

Procedure

1. 1. Check that the rubber ring is undamaged and
2. seated correctly in the thermostat flange.
3. 2. Install the thermostat as shown in the illustration.
4. The jiggle valve must be at the uppermost
5. position.

Source: manual:Mitsubishi-2.0L-2.4L-Service-Manual-106992-Revision-D.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.