Mitsubishi — Procedure 22

A Mitsubishi service procedure — check it applies to your exact model before use.

Browse Mitsubishi generators & specs →

Procedure

1. 1. Oil level gauge
2. 2. Oil level gauge guide >>A<< 9. O-ring
3. 3. O-ring 10. Thermostat housing
4. 4. Water inlet fitting >>A<< 11. Water inlet pipe
5. >>C<< 5. Thermostat >>A<< 12. O-ring
6. >>B<< 6. Water outlet fitting 13. Water pump
7. 7. By-pass fitting 14. Water pump gasket
8. >>A<< 8. Water inlet pipe 15. Water inlet fitting

Source: manual:Mitsubishi-2.0L-2.4L-Service-Manual-106992-Revision-D.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.