Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Procedure 19

Mitsubishi — Procedure 19

A Mitsubishi service procedure — check it applies to your exact model before use.

Browse Mitsubishi generators & specs →

Before you start

  • NOTE: Use a torque wrench that can measure 0

Procedure

  1. 10. Install special tool Tension pulley socket
  2. wrench (800407), socket wrench and torque
  3. wrench, onto the tensioner pulley, and loosen the
  4. tensioner pulley center bolt.
  5. NOTE: Use a torque wrench that can measure 0
  6. to 5.0 N·m.
  7. 11. Torque to 2.5-2.6 N·m with the torque wrench.
  8. 12. Holding the tensioner pulley with special tool
  9. Tension pulley socket wrench (800407) and
  10. torque
  11. wrench
  12. tighten
  13. the
  14. center
  15. bolt

Tools required

  • NOTE: Use a torque wrench that can measure 0
  • 10. Install special tool Tension pulley socket
  • wrench (800407), socket wrench and torque

Specs & torque values

  • 5.0 N·m
  • 2.6 N·m
  • 5 N·m

Source: manual:Mitsubishi-2.0L-2.4L-Service-Manual-106992-Revision-D.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.