Mitsubishi — Procedure 13

A Mitsubishi service procedure — check it applies to your exact model before use.

Browse Mitsubishi generators & specs →

Procedure

1. 2. Install the timing belt "B" on the crankshaft
2. sprocket "B" and counterbalance shaft sprocket.
3. There should be no slack on the tension side.
4. 3. Make sure that the tensioner pulley center and
5. the bolt center are positioned as shown in the
6. illustration.

Source: manual:Mitsubishi-2.0L-2.4L-Service-Manual-106992-Revision-D.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.