Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›INSTALLATION SERVICE POINTS

Mitsubishi — INSTALLATION SERVICE POINTS

A Mitsubishi service procedure — check it applies to your exact model before use.

Browse Mitsubishi generators & specs →

Before you start

  • NOTE: The special tool must be used to install the

Procedure

  1. 1. Install the valve spring seat.
  2. 2. Using special tool Valve stem seal installer
  3. (800412), install a new valve stem seal.
  4. NOTE: The special tool must be used to install the
  5. valve stem seal. Improper installation could result
  6. in oil leaking past the valve guide.
  7. 1. The valve spring, if excessively compressed,

Tools required

  • 2. Using special tool Valve stem seal installer
  • NOTE: The special tool must be used to install the

Source: manual:Mitsubishi-2.0L-2.4L-Service-Manual-106992-Revision-D.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.